Dependable, easy to use; just pour one or two quarts of Ethy-Gen^® II and ethylene production quickly begins.

Provides pressureless ethylene on a continuous basis for uniform ripening & degreening.

Ethylene output is adjustable for multiple room sizes, which means the Easy-Ripe^® can adapt to any ethylene PPM requirements and can be fine tuned.

• Can work with a computerized ripening room control system.
• Available in a wall-mounted version.
• Large 2½ quart reservoir.
• 43 cubic metre minimum room size.
   

  We continue to look for ways to improve our products and make ripening even easier and more efficient. One of our latest improvements is the Proper Operation Indicator Light.                                                                                                                                Making the ripening job even easier, an all-new control board powers this indicator light and monitors critical processes of the generator. A bright green light indicates that these processes are running correctly and ethylene production should be optimal. If anything falls outside of our parameters, then the board will shut the generator down and change the indicator light to red. We are now shipping limited quantities of Easy-Ripe® Generators with this Indicator Light and are gradually phasing in this improvement. All Easy-Ripe® units will be equipped within the next several years.

  • Electrical specifications:

     

    • 230 VAC / 160 W / 50 - 60 Hz / 0.65 Amp
    •  
  • Conversion Rate Settings and approximate room size*:
  • 
    # 1: 1 Quart of Ethy-Gen^® II every 48 hours; 1,500 to 2,499 ft³ (43 - 70 m³)
    # 2: 1 Quart of Ethy-Gen^® II every 36 hours; 2,499 to 4,999 ft³ (71 - 141 m³)
    # 3: 1 Quart of Ethy-Gen^® II every 24 hours; 5,000 to 7,499 ft³ (142 - 212 m³)
    # 4: 1 Quart of Ethy-Gen^® II every 12 hours; 7,500 to 12,000 ft³ (213 - 340 m³)
    *It may be possible to use just one generator for a room that is larger than 12,000 ft³ (LxWxH, 340 m³); it depends upon how tight the room is. We have found these setting to be applicable for most rooms and provide sufficient ethylene (150 - 300 ppm) to initiate the ripening process in bananas, tomatoes and other fruits (except citrus, which requires less than 10 ppm; for this, use our Citrus Generator). However, some ripeners prefer to take ethylene readings with an Air Sampling Kit and select the setting that produces the ethylene level desired. As always, please contact us if we can be of service.

  Click here to download additional details on the Easy-Ripe^® Generator.

  
  Available for lease or purchase; call for details.

Home         Ethy-Gen II         Generators         Ripening Tips         FAQ's